--------- Begin forwarded message ----------
From: N4KG
To: dick@libelle.com, tower
Subject: Re: [TowerTalk] Drain on beam end caps
To: <towertalk@contesting.com>
Date: Thu, 20 Nov 1997 13:45:53 -0600
Message-ID: <19971120.175349.9990.3.N4KG@juno.com>
References: <34743487.3AF04E78@lynchburg.net>
Most of these plastic caps deteriorate over time from uV exposure.
To extend their useful life, wrap them with black tape BEFORE
putting the antenna up. Good old Scotch 33 works great.
Drain holes in the end caps are good!
de Tom N4KG
............................
On Thu, 20 Nov 1997 08:19:29 -0800 Dick Flanagan <dick@libelle.com>
writes:
>At 7:56 AM -0800 11/20/97, Charles H. Harpole wrote:
>>I make a small hole in the lower part of all boom and element end
>caps for
>>drain on beams. K4VUD
>
>Interesting point. I am in the process of putting a TH-11 together
>and it
>uses dampening cord in the small elements with plastic end caps on all
>elements and the boom. Except for drain holes in the (six) traps,
>there
>appears to be no other attempts at providing moisture drainage. Ditto
>for
>the 40-2CD I am putting together.
>
>Should I be drilling drain holes in all of the elements? In the end
>caps?
>
>73, Dick
>
>--
>Dick Flanagan W6OLD CFII Minden, Nevada (South of Reno)
>Visit http://www.qsl.net/w7di/
>
>
>
>--
>FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>Submissions: towertalk@contesting.com
>Administrative requests: towertalk-REQUEST@contesting.com
>Problems: owner-towertalk@contesting.com
>Search: http://www.contesting.com/km9p/search
>
--------- End forwarded message ----------
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|