I posted this to the wrong reflector so I sent it over here where it
belongs.
----------------------------------------------------------------------
> Hello All
> I am finally geting ready to put in the base for my first tower
>project. I have 40 ft of Rohn 25 and plan to add another 30ft to it to
>make 70ft total height. I want to be able to fold this tower over it
>came with a BPH25G base plate and a 19ft pole to surport the tower.
> I feel that the 3/8 bolts on the base plate are to small to fold this
>over safely, would the SBH25G be a better choice? or should I build a
>stronger base plate my self? I contacted Rohn with this question and
the
>response I got was "We just build them we don't energineer them"
inother
>words they won't say.
> My next question is about the support pole to hold the tower when I
>fold it over. THe pole I got with the tower is 19 ft long and about 1
>1/2" in diameter. I plan to put 2 section of pipe under this the bottom
>section will be 3 1/2" in diameter and 5 ft in concrete the middle
>setion will be 2 7/8" diameter. I plan to overlap them about 6" to a
>foot so the total pole will be 5 ft in concrete and 35ft above ground
>will this be big enough pipe and be long enough to fold over the 70 ft
>tower with a TH6 on top or do I need to go higher or bigger with the
>pipe? It will only have a load on it when I have to fold the tower
over.
> I've been told by a local ham that this "should work" but it would be
>best to guy the pole when I fold the tower over, so I plan to have 5
guy
>post to guy too, 3 for the tower and 2 for the pole.
>It should look like this
>
>
>
> o o
>
>
>
> o 0<|
>
>
> o o
>
> Well I'm no artist on the key board but in the above diagram the
top
>and bottom post on the left side are for the pole when I have to fold
>over the tower over the rest are for the tower it is not drawn to scale
>but I will use the recommended 80% of the tower heigth. I beleive it
>will be 56ft out from the tower. I plan to guy this thing at 20 40 and
>60 ft ie every other section right or wrong? Can I use the drycron rope
>for guys? I hate to try and figure out where to break up the wire guys
>with insulaters and the Kelvar seems expensive but I could probably
save
>up enough to get the Kelvar stuff I think the brand name is Phillystran
>isn't it?
> THe base wil be 4X4X5 ft deep is that big enough?
> Right now I have the 40ft of Rhonn 25 tower (will add 30ft more) the
>TH6 beam and a Tailtwister rotor. future plans might include an A3WS
for
>the WARC bands not sure if I will try to put a forty meter beam on it
>probably will be too much antenna on one tower.
> AS you csn see I have been planing this for a LONG time, several
years
>in factand I still have lots of questions. I need suggestions from the
>wisdom of the group as I don't plan having to redo this project. I want
>to do it right the first time.
> And for Steve ( sorry I can remeber your call if you want to figure
>the wind for this area I'm in Parker county Texas).
>73 and Thanks
>Rick
>KC5AJX
>
>______________________________________________________
>Get Your Private, Free Email at http://www.hotmail.com
>
>
>--
>CQ-Contest on WWW: http://www.contesting.com/_cq-contest/
>Administrative requests: cq-contest-REQUEST@contesting.com
>
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|