Towertalk
[Top] [All Lists]

[TowerTalk] Insulated bases for Rohn 25??

To: <towertalk@contesting.com>
Subject: [TowerTalk] Insulated bases for Rohn 25??
From: n4zr@contesting.com (Pete Smith)
Date: Mon, 23 Mar 1998 14:05:11 -0500
At 01:21 PM 3/23/98 -0500, Jim Miller wrote:
>Bryan;
>
>Go to:
>
>www.aaow.com/mgs
>
>This is Max-Gain Systems
>
>Click on Antenna Mart for a photo of insulators they make for 25G tower
>to be used as verticals.
>
>Also see www.contesting.com/km9p/4square2.htm
>
>for actual photos of W4AN's installation.
>
>I recall  the Antenna Mart set as around $275. and Rohn section as $400.
>to $600.
Alternatively, consider trying the K3LR lazy-vee wire parasitic array
described in 8/94 QST before you spend all that money.  Modeled, it's
within 1 dB of a 4-square with average ground characteristics (NEC-2,
high-accuracy), has virtually the same vertical pattern, and has as good or
better F/B.  In real life, I suspect it may even have more gain, because it
is not dependent on the ground plane for current return.




73,

Pete N4ZR

In Wild Wonderful, fairly rare WEST Virginia

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search

<Prev in Thread] Current Thread [Next in Thread>