In a message dated 98-03-26 20:41:36 EST, twoway@scoden.ma.ultranet.com
writes:
> Plan on sitting there for about 2 hours with a hacksaw, I did mine with a
> metal blade in a tiger saw and it took me almost 1/2 hour and alot of
> cursing to cut mine. I could'nt beleive how tuff that stuff was-it took the
> teeth off a standard blade, I had to go to the store and get a Cobalt
blade.
Yikes. Either rent or borrow a hand grinder or put an aggregate blade
for steel in your Skilsaw (it's less than $5.00). Wear your goggles and it'll
take you five minutes max.
73, Steve K7LXC
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|