At 4:39 AM -0800 4/25/98, Malcolm Clark wrote:
>K7LXC wrote:
>>
>> You used the base drawing B870725 which is what the catalog
>>says. The
>> blue brochure for "Bracketed or Self Supporting Towers" refers to a drawing
>> A871298 which I couldn't find anywhere. Did you notice this conflict?
>>
>> 73, Steve K7LXC
>
>Whoa, no wonder so many people think a self-supporting tower only
>requires a 2 x 2 x 4 base. A871298 is the drawing for a BRACKETED tower
>base, and is in my catalog as A871298R1 (rev. #1). It is printed on the
>back of drawing A871302R1. This is serious enough that I am posting
>this to the reflector too. Glad I didn't pay much attention to the
>brochure.
I'm still looking for Drawing B841300 covering "installation notes and
tolerances." My catalog is stamped May 1997.
73, Dick
--
Dick Flanagan W6OLD CFII Minden, Nevada DM09db (South of Reno)
Visit http://www.qsl.net/cvrc/
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|