>X-From_: owner-towertalk@contesting.com Wed May 20 18:07:16 1998
>Return-Path: owner-towertalk@contesting.com
To: <towertalk@contesting.com>
>Date: Thu, 21 May 1998 01:05:39 -0700
>From: Arthur Moe <kb7ww@chatusa.com>
>To: Tower <towertalk@contesting.com>
>Subject: [TowerTalk] INFO needed on HAM-M
>Sender: owner-towertalk@contesting.com
>Precedence: bulk
>X-List-Info: http://www.contesting.com/towertalkfaq.html
>X-Sponsor: W4AN, KM3T, N5KO & AD1C
>
>I know have seen this in print and now can't find it. What size mast
>comes the closest to running on center in the Ham-M??
>
>art
>KB7WW
I believe the number is 2 1/16". This means you need the shim it 1/32 of an
inch at both places the mast touches the bell housing. I use two narrow
strips of 1/32 aluminum sheet that I cut with tin snips. Works great. No
need to shim under the u-bolts.
Stan w7ni@teleport.com
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|