My dad has acquired an old 55 foot crank-up tower, apparently home made,
and in the process of reconditioning it.
He is trying to find pulleys that he can use on the various parts of the
crank-up sections and hasn't been able to find anything locally. He plans
to use 3/16 cable and would like to know of good sources for pulleys that
are suitable for this application. He estimates the total weight of the
crank-up sections and the antenna on top at around 300 lbs.
Know of any good sources? Please reply via direct e-mail.
Thanks & 73,
-Marty KI0LO
martyt@pobox.com
===========================================================================
Marty Tippin KI0LO | Tippin's Law #9: Stupid people outnumber the rest
martyt@pobox.com | of us by at least 5 to 1...
===========================================================================
http://hbd.org/users/mtippin - Marty's Homebrew (Beer) Gadgets Page
===========================================================================
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|