Dave:
I have place a scanned copy of my TH7DX manual at the following
ftp site:
ftp://ftp.skypoint.com/pub/members/t/tao/docs/
The file is in .pdf format and will require Acrobat 3.0 to read.
The reader is available at no cost via download from the www.
(Adobe)
As I was scanning the manual it occurred to me that this manual
is a very early one. The TH7DX I own was manufacture very early
in the HyGain production sequence. It does not discuss upgrade
kits.
Tod Olson, K0TO
-----Original Message-----
From: DavidC <davidc@bit-net.com>
To: towertalk@contesting.com <towertalk@contesting.com>
To: <towertalk@contesting.com>
Date: Tuesday, June 09, 1998 1:11 PM
Subject: [TowerTalk] Need: TH7DX Manual & Aluminum Cleaning
Advice
Anyone have an extra TH7DX manual, or a copy I could acquire? I
want to
assemble mine and get it up while I look into the modification
process of
my TH6DXX.
Also, what is the recommended process to clean up aged aluminum?
I was
thinking of spraying the beam with a TSP-substitute solution,
running a
soft brush over it, and then hosing it down to dry in the sun.
Good or bad
idea, a better alternative?
Thanks! & 73, DavidC AA1FA
--
FAQ on WWW:
http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search:
http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|