Towertalk
[Top] [All Lists]

[TowerTalk] 25G Rotator Plate.

To: <towertalk@contesting.com>
Subject: [TowerTalk] 25G Rotator Plate.
From: davidc@bit-net.com (DavidC)
Date: Sun, 9 Aug 1998 21:00:15 -0400
> This has probably been asked before but how in the heck do you get the
rotator
> plate on 25G to fit inside the tower.  Appears I may have to either bend
or
> cut some of the cross braces to get it to fit.  Prior to doing that, I
thought
> I'd ask all the experts out there.  Dave  KF8KW

It is my understanding that there are certain Rohn 25 top sections (I think
BAS25G, 20BG or 25AGx were specified) that allow the ready mounting of
rotor plate and rotor, others will have to be cut (though clamping the cut
angle piece properly should restore strength).    

>>Should have stayed with the 45G!!!!!!!

Wish I could find used 45G here in New England at a reasonable price!
73, DavidC  AA1FA

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>