For some years I removed jumpers on my half wave 80 meter sloper array when
it was SSB time until I discovered this. When the jumper was off the top
half and on the bottom half, the vswr curve had two dips. One was at 3800
and the other was at 3525. It worked fine for both segments.
George
w2vjn@rosenet.net
----------
> From: Barry Kutner <w2up@mindspring.com>
> To: towertalk@contesting.com
> Subject: [TowerTalk] waterproof enclosures?
To: <towertalk@contesting.com>
> Date: Saturday, August 15, 1998 7:29 AM
>
>
> Hi All - One of the projects on the agenda this summer/fall is
> adding relays to my 80m slopers to be able to switch from CW to
> SSB from in the shack, rather than going outside and folding back
> some wire.
>
> I found some nice Jennings relays, that look like they'll do the trick
> (check out http://www.aaow.com/mgs/president.htm). Now, I need
> some small (2x2x3 inches or lil bigger) to be used outdoors
> (waterproof and UV resistant). Any suggestions?
> Tnx/Barry
> --
> Barry Kutner, W2UP Internet: w2up@mindspring.com
> Newtown, PA FRC alternate: barry@w2up.wells.com
>
> --
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
>
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|