Hi Mike,
My Telrex 3L20 came with pre-drilled holes so all I had to do
was assemble it. The instruction sheet showed NO dimensions
for adjusting element lengths.
If your 3L10 does not have predrilled holes, and you are not
successful in obtaining the suggested lengths, then the next
best thing is to model the antenna and optimize for your desired
performance.
BTW, the Telrex 3L designs are VERY GOOD designs, a real
tribute to someone having spend a LOT of time and effort on
their antenna test range. Telrex had Yagi design / optimization
down long before computer modeling was even thought about.
73 / GL, Tom N4KG
_____________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com
Or call Juno at (800) 654-JUNO [654-5866]
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|