I described such a procedure about 1 week ago on this reflector. I use
the AEA RF Analyst and cut the lengths using the Return Loss measurement
feature. Works fine.
If you can't find it in the archives, ask me to re-create the write-up
for it.
Bill, N3RR
CP2235@aol.com wrote:
>
> Hello,
>
> what is the preferred method to cut EXACT 1/4 or 1/2 wavelength stubs designed
> for the center of the ssb or cw sections to make transmitting stubs for
> multiop contesting? My equipment park is a poor student's one with the usual
> meager tools. Could get hold of an oscilloscope but no low C probe head
> available at present. RF1-analyst does not seem to be the right instrument for
> sharp measurements either.
> Any other ideas? All hints are very welcome and the WWDXSSB is near.... :-)
>
> 73 Con DF4SA
>
> --
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|