That formula "works" within a limited range of loss, but keep in mind it is
just an approximation.
> Why didn't you use the method that Autek reccomends, ie, monitoring
> the Z on the RF1 at the dips. That can tell the loss better than SWR.
> Their formula for loss is: Loss(db)=.17*Z.
For example, look at a line with infinite loss. Z=50*.17= 8.5 dB loss.
It also depends on Z being accurate, and would require he measure loss at
different frequencies every time he cut the line to a new length.
73 Tom
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|