Seems this is a good place to ask tough questions:
Moved and reinstalled my tower. It is Rohn 45. On top
is a Force 12 C3 (works great, but can't get 12 & 17 down w/tuner).
That's not the main problem. I also installed a used (very little) Alpha
Delta DX-A sloper antenna.
At the old qth I had a TH7 on top and a homemade 80/40 sloper about 3 ft.
below it. Worked very well. Now the new sloper is about 3 ft below the
C3
and it only resonates on 160. There are NO guy wires or nearby metal
object.
The tower is grounded by a rod about 10 in the earth. The swr on 40 and
80
is flat across the band AND I have a serious problem getting a match with
a Murch tuner. Basically it will not match any better than w/o the tuner.
Local guys are stumped. Ideas I have are bad coax connector at antenna.
Or, with no balun or coax coil the antenna may be coupling to the tower.
The
coax comes down the tower to a RCS-8V remote switch.
Any ideas? I can't climb the tower because of physical limitations and
don't
want to impose on friends too often!
Fred, K2FR
___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|