This is a multi-part message in MIME format.
------=_NextPart_000_0074_01BE292B.57BD2A20
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Hi All,
I just refurbished an old Telrex 6el tri-bander. I took apart every =
joint, cleaned with emery cloth (about 100 grit) and an industrial =
Scotch Brite pad, wiped it down with a cloth, put ICE anti-oxidant on =
both surfaces (same folks from Indiana that make all the neat filters & =
lightening protection stuff), assembled the joint, wiped off excess =
then finished by wrapping with Scotch #33 electrical tape and gave it a =
coat of ScotchCote. =20
=20
This antenna had black and white CRUD in the joints and water in the =
balun. Was sound otherwise and is now working great at 60 ft in the =
air. OH, I had read somewhere ( NCJ I think ) that Scotch #33 or 88 =
electrical tape was recommended over that stuff that for a little while =
is sticky on one side. Believe it! =20
=20
73
Greg K9ZM
------=_NextPart_000_0074_01BE292B.57BD2A20
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">
<HTML>
<HEAD>
<META content=3Dtext/html;charset=3Diso-8859-1 =
http-equiv=3DContent-Type><!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 =
HTML//EN">
<META content=3D'"MSHTML 4.72.3110.7"' name=3DGENERATOR>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT color=3D#000000>Hi All,</FONT></DIV>
<DIV><FONT color=3D#000000>I just refurbished an old Telrex 6el =
tri-bander. =20
I took apart every joint, cleaned with emery cloth (about 100 grit) and =
an=20
industrial Scotch Brite pad, wiped it down with a cloth, put ICE=20
anti-oxidant on both surfaces (same folks from Indiana that make all the =
neat=20
filters & lightening protection stuff), assembled the joint, =
wiped off=20
excess then finished by wrapping with Scotch #33 electrical tape and =
gave it a=20
coat of ScotchCote. </FONT></DIV>
<DIV><FONT color=3D#000000></FONT> </DIV>
<DIV><FONT color=3D#000000>This antenna had black and white CRUD in the =
joints and=20
water in the balun. Was sound otherwise and is now working great =
at 60 ft=20
in the air. OH, I had read somewhere ( NCJ I think ) that Scotch =
#33 or 88=20
electrical tape was recommended over that stuff that for a little while =
is=20
sticky on one side. Believe it! </FONT></DIV>
<DIV><FONT color=3D#000000></FONT> </DIV>
<DIV><FONT color=3D#000000>73</FONT></DIV>
<DIV><FONT color=3D#000000>Greg K9ZM</FONT></DIV></BODY></HTML>
------=_NextPart_000_0074_01BE292B.57BD2A20--
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|