--=====================_9644650==_.ALT
Content-Type: text/plain; charset="us-ascii"
Explained better,
I wired my SA-2060 during assembly (1982) so that:
Bypass Position is ............... RF goes to Coax 1, bypassing the tuner
Coax 1 Position is ................ RF goes to Coax 1 thru the tuner.
Coax 2 Position is ................ RF goes to Coax 2 thru the tuner. (I
never use this)
All you have to do is wire the switch configuration slightly different.
N5RP
--=====================_9644650==_.ALT
Content-Type: text/html; charset="us-ascii"
<html>
<font size=3>Explained better,<br>
I wired my SA-2060 during assembly (1982) so that:<br>
<br>
Bypass Position is ............... RF goes to Coax 1, bypassing the
tuner<br>
Coax 1 Position is ................ RF goes to Coax 1 thru the
tuner.<br>
Coax 2 Position is ................ RF goes to Coax 2 thru the tuner. (I
never use this)<br>
<br>
All you have to do is wire the switch configuration slightly
different.<br>
<br>
N5RP</font></html>
--=====================_9644650==_.ALT--
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|