| To: | <towertalk@contesting.com> |
|---|---|
| Subject: | [TowerTalk] Guy wire strength |
| From: | K7LXC@aol.com (K7LXC@aol.com) |
| Date: | Fri, 19 Feb 1999 10:53:44 EST |
In a message dated 99-02-19 06:34:49 EST, aseabolt@mail.lumpkin.k12.ga.us
writes:
<< Can anyone tell me the strength of 1/4 EHS and 3/16 EHS guy wire?
>>
Ultimate breaking strength for the 1/4 inch EHS is 6700 pounds; 3/16 EHS
is 3990 pounds. Tension should be 10% of UBS.
Cheers, Steve K7LXC
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [TowerTalk] Guy wire strength, J. Allen Seabolt |
|---|---|
| Next by Date: | [TowerTalk] quad model notes, L. B. Cebik |
| Previous by Thread: | [TowerTalk] Guy wire strength, J. Allen Seabolt |
| Next by Thread: | [TowerTalk] quad model notes, L. B. Cebik |
| Indexes: | [Date] [Thread] [Top] [All Lists] |