that is common on larger rohn towers, but they don't seem to use that
option on the standard designs for rohn 25.
Steven H. Sawyers n0yvy wrote:
>
> 1/4" on the top set for Rohn 25 is my preferred installation.
> Just don't mix sizes at one level. It makes the putting on
> proper tension a very difficult compromise.
>
> de n0yvy steve
>
> At 07:27 PM 3/3/99 -0500, J. Parise wrote:
> >
> > Are there any issues related to mixing 1/4" and 3/16" guy wire on a 25G
> > tower?
> >
> > i.e., 1/4" for the top set, 3/16" for the lower sets or some other
> > combination.
> >
> > 73 -- Jim W1UK
>
> --
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
--
David Robbins K1TTT (ex KY1H)
k1ttt@berkshire.net or robbins@berkshire.net
http://www.berkshire.net/~robbins/k1ttt.html
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|