At 17:47 3/9/99 -0500, K7LXC@aol.com wrote:
> What can you do? You could try some thin rubber material between the
>mast and clamp although I think that some TowerTalkians have found this to be
>unsatisfactory. One fix that I think did work was to apply some ScrewGrab
>where the metal to metal contact is.
===============================>
Plain emery paper folded back to back so rough surfaces contact both
components works quite well, and will last quite a long time.
N5RP
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|