Wrong.
The ARRL now allows gain figures to be purblished in QST ads providing that
you go through a special procedure. This has been mentioned on this
reflectors many times. However, I'm not sure anyone has yet bit the bullet.
73,
Joe, W1JR
>BTW, the ARRL will not allow any antenna mfg. to advertise any information
>regarding "gain" in
>their journal. The differences between isotropic and ddipole conditions is
>significant, and some
>manufacturers compare their gain to an ISOTROPIC condition. Most beams will
>respond to
>tuning near to, or less than the claimed dB gain.
>
>Your models are trying to produce an isotropic antenna's gain and other
>factors. Keep up the
>good work, it sounds interesting, and many of us are reading intently on the
>subject as it goes
>.
>Aloha,
>
>n8csp
>
>tnx es 73 de n8csp
>http://www.wwcpm.org
>
>
>
>
>--
>FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>Submissions: towertalk@contesting.com
>Administrative requests: towertalk-REQUEST@contesting.com
>Problems: owner-towertalk@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|