I just gobbed a bunch of silicon sealer around the terminals and
all over the top of the cap and mounted it upside down on the tower.
Did this to two of them and they've been up for 5 years.
Jim - K9DD
At 02:07 PM 7/15/99 +0000, you wrote:
>
>I used a short piece of PVC pipe and couple of matching PVC
>end caps. Solder wire pigtails onto cap long enough to
>reach bottom of T2X, drill hole in one of the PVC caps
>to feed the pigtail thru then put the motor cap inside
>the PVC pipe and put on the caps and tape or hose clamp
>to convenient tower leg or whatever.
>
>73 de Phil NA4M
>--
>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>Phil Duff NA4M na4m@texas.net Georgetown, Texas
>
>--
>FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>Submissions: towertalk@contesting.com
>Administrative requests: towertalk-REQUEST@contesting.com
>Problems: owner-towertalk@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|