19 years ago I pained my mast with a high temp red primer paint (don't
remember the brand). Then I put on a coat of aluminum paint. The aluminum
paint as come off in spots, mostly where the mast brackets have beem. But,
the primer has held up very well.
Tony
-----Original Message-----
From: owner-towertalk@contesting.com
[mailto:owner-towertalk@contesting.com]On Behalf Of jack colson
Sent: Wednesday, July 28, 1999 9:44 AM
To: towertalk@contesting.com
Subject: [TowerTalk] 4130 mast corrision treatment?
I have been told totally opposite approaches for treating 4130 Chrome-
moly mast material. I'd like to learn what others have done. So what
is recommended ?
Thanks,
Jack, W3TMZ
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|