Hi John,
Having just rebuilt five T2X's in the last few months,
I would suggest the fittings that the you can order from
www.rotordoctor.com. They are $15, but are more reliable,
and weatherproof. At the same time I put the connectors on,
I also moved all the capicitors to just below the bell housing.
Just a thought.
Scott K8DX
-----Original Message-----
From: WA9ALS - John <jfleming@shelbynet.net>
To: towertalk@contesting.com <towertalk@contesting.com>
To: <towertalk@contesting.com>
Date: Thursday, September 16, 1999 8:09 PM
Subject: [TowerTalk] Stripped T2X terminal strip
>
>OK, tail between my legs, I have to admit that I stripped one contact on
>the T2X terminal strip. It's the "nut" end that's stripped. Solutions?
>Small sheet metal screw? I hate to have to replace the whole terminal
>strip part! Tnx!
>
>WA9ALS - John jfleming@shelbynet.net
>http://www.shelbynet.net/~jfleming/towerproject.htm
>http://www.shelbynet.net/~jfleming/amstart.htm
>
>
>--
>FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>Submissions: towertalk@contesting.com
>Administrative requests: towertalk-REQUEST@contesting.com
>Problems: owner-towertalk@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
>
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|