Gents,
Does anyone know where *short* sections (3 feet long) of 2" ID x 0.25"
wall steel tubing can be bought?? It **is** made and is a fairly common
size but distributors don't want to talk with you unless it is at least
a $500 order. Phone calls over the past couple of weeks have yielded
only irritation & frustration. Alloys of 4130, 1026 are fine and even
1020 steel would probably work OK. Welded or DOM (drawn over mandrel)
are not a concern either. Can't use schedule 80 pipe; has too small an
ID (1.936"); needs to be the 2".
Time for decent wx is growing short!
TIA,
Tom - WA2BPE
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|