Towertalk
[Top] [All Lists]

[TowerTalk] guying question

To: <towertalk@contesting.com>
Subject: [TowerTalk] guying question
From: n4kg@juno.com (n4kg@juno.com)
Date: Fri, 1 Oct 1999 07:29:56 -0600


On Sun, 26 Sep 1999 07:59:56 -0400 "Barry Martz" <k8bk@speedconnect.com>
writes:
> 
> Hi all
> 

> 
> I have a 75' rohn tower with two sets of guy wires  (73' and 37').  
> Guys come off the tower for about 8' to the insulator, then about 
>25' to  the  second insulator.
> 

        Why 8 ft?  Look at your insulator to insulator distances.
        8 ft from the first insulator, 1 ft across the tower, 8 ft to
        either of the other two insulators.   17 ft total.  Makes a
        nice REFLECTOR on 10M.  The FIRST insulator needs
        to be less than 5 ft from the tower to avoid HF resonances.
        de  N4KG
> 
> 3.  I was thinking of running about 20-30 feet of Phillystran off 
> the top  and then the regular guy wire from there down.  Would 
>that be  usefull or  only if I use Phillystran all the way?
> 
   20 to 30 ft of Phillystran is a good idea.  50 ft might even be
better.
   Depends on how tall the tower is and what antennas are stacked
   below the top of the tower.  N4KG

> Thanks for any suggestions
> 
> Barry/K8BK
> 
 
___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] guying question, n4kg@juno.com <=