Take a look on Ebay. There are guy wire insulators curretnly being
auctioned.
73 Barry
On 2 Dec 99, Bill Wall wrote:
>
>
>
> Bill Wall wrote:
>
> > Hi Everybody and Mike,
> >
> > I have searched for porcelain Guy insulators for many years. The best were
> > the dark brown ones from WWII surplus. The only company I have found still
> > producing any insulators acceptable, is PPC. Porcelain Products corp. Their
> > prices are through Electrical Wholesale Distributors. Their color is blue
> > gray. They are not as strong as the old brown ones. They are expensive. No I
> > do not have any to sell. Press might have some. I so far, use only one at
> > the top of my towers. After many test If there is no problem, I do not worry
> > about it. The ARRL handbook has all kind of non resonate lengths.
> > Bill Wall
> > Antenna Mart
> >
> > "Gilmer, Mike" wrote:
> >
> > > I've looked in various archives and on-line vendor catalogs, but I cannot
> > > find information on the insulators necessary to "break up" guy wire.
> > >
> > > What types are generally used and where does one get them from?
> > >
> > > Thanks,
> > > Mike
> > > n2mg@contesting.com
> > >
> > > --
> > > FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> > > Submissions: towertalk@contesting.com
> > > Administrative requests: towertalk-REQUEST@contesting.com
> > > Problems: owner-towertalk@contesting.com
> > > Search: http://www.contesting.com/km9p/search.htm
>
>
> --
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
>
--
Barry Kutner, W2UP Internet: w2up@mindspring.com
Newtown, PA FRC alternate: barry@w2up.wells.com
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|