David,
Be sure and look at the tower sections you receive, Rohn is having
quality control problems. Of 26 sections I received, many were faulty.
The dealer, in turn, found that over 50% of his inventory was defective.
Rohn DOES stand up to the problem and provide remedy.
Gerry, W6TER
DavidC wrote:
>
> I am taking inventory of my Rohn 45 parts before I start digging holes.
>
> I have several turnbuckles that are labeled "6" at one end and "1/2"
> at the other.
>
> The tower will have one section partially sunk in the base, five full
> sections above that and then the top section for about 65 feet in height.
> The guys are Phillystran with metal guy cable patched in at the ends.
>
> Are these turnbuckles acceptable?
>
> - Thanks! & 73, DavidC K1YP
> ************************************************************************
>
> __________________________________________
> NetZero - Defenders of the Free World
> Get your FREE Internet Access and Email at
> http://www.netzero.net/download/index.html
>
> --
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|