Left the crank arm in the wrong position on my new tower and when it
tried to rotate the arm hit the raising fixture and kept it from
moving.Rotor is a TX2 tailtwister.Now it won't rotate,the fuse in the
back was good but the one on the meter board was blown and replacing it
didn't help.Bought this whole setup from a SKs estate and don't have a
manual.
--
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|