On 3/7/01 11:00, K7LXC@aol.com at K7LXC@aol.com wrote:
> You cannot weld to Rohn 25G or 45G - the legs are too thin.
I beg to differ! People have built aircraft for decades using much
thinner tubing thicknesses than Rohn 25 or 45 have.
Naturally, thin-walled tubing is a bit more challenging to weld, but the
tubing sides of 25 and 45 are plenty thick by comparison.
Bill Coleman, AA4LR, PP-ASEL Mail: aa4lr@arrl.net
Quote: "Not within a thousand years will man ever fly!"
-- Wilbur Wright, 1901
--
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|