Towertalk
[Top] [All Lists]

[TowerTalk] Lower Mast Question Again

To: <towertalk@contesting.com>
Subject: [TowerTalk] Lower Mast Question Again
From: K7LXC@aol.com (K7LXC@aol.com)
Date: Sat, 21 Apr 2001 10:41:01 EDT
In a message dated 4/20/01 10:33:04 AM Pacific Daylight Time, gclute@home.com 
writes:

> Does anyone use seamless stainless steel?  I had an 8 foot piece up
>  for about
>  15 years stacking a 4 element 10 meter beam and a 3 element 6 meter
>  beam without problem.

    That's a fairly insignificant load so the choice of materials probably 
didn't make any difference - water pipe would've worked. 

    The suitability of the material itself depends on its yield strength - 
not its composition. 

Cheers,    Steve    K7LXC
Tower Tech 

List Sponsor:  ChampionRadio.com - Trylon self-supporting towers,
safety equipment, rigging gear, LOOS tension guages & more!
http://www.championradio.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>