I'll be using LM-400UF, from 6m beam, to a point below top of tower where
the coax will join, via N connectors, to 1/2" hardline for the run to the
shack. As the 400UF is not extremely flexible I'm at a loss to determine a
way to insure there is no coax movement at the connectors and yet still have
sufficient slack for the rotating loop. Would like to hear from someone who
has done a similar installation. Thanks in advance. Joe K7MKS
List Sponsor: ChampionRadio.com - Trylon self-supporting towers,
safety equipment, rigging gear, LOOS tension guages & more!
http://www.championradio.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|