I am wondering about other ideas for house entry of hardline (1/2"),
rotor cables and control lines. Here are my present thoughts.
I need to come through a wall at grade level. I am thinking about an
18x18x8 Hoffman box (3R for rain protection). This box would on the
exterior and would be fastened to the studs (16" centers). To the rear
interior of the box, I am thinking about attaching an 1/8 inch sheet of
copper. I would then punch holes in the copper and the galvanized box
steel for Polyphaser stuff. I would connect a rod ground system
(Cadweld'ed) with #2 solid copper line to the sheet of copper.
Inside the house, I would cut the plaster board away at the dimensions
of the box and place molding around the studs, etc. to make a neat
installation.
Out the bottom of the box I would punch for two four inch conduits. The
conduits (steel) would have a gradual bend to horizontal below grade.
Am I on track?
Gerry, W6TER
List Sponsor: ChampionRadio.com - Trylon self-supporting towers,
safety equipment, rigging gear, LOOS tension guages & more!
http://www.championradio.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|