Steve,
Will there be rust problems with SAE 1026 or 1027 carbon steel
alloy pipe? Does the pipe need to be treated?
Eric
>--- Original Message ---
>From: K7LXC@aol.com
>To: aa4lr@arrl.net, wd3q@erols.com, towertalk@contesting.com
To: <towertalk@contesting.com>
>Date: 5/7/01 12:05:23 PM
>
>In a message dated 5/7/01 12:38:40 PM Pacific Daylight >Time,
aa4lr@arrl.net writes:
>
>> Frankly, if you are trying to judge between 7075 and >>6061,
I'd go with 6061. 7075 isn't much stronger, and it >>can be really
expensive. 6061 is pretty common.
>
> I agree and all of the above is true.
>
>> If 6061 doesn't have enough strength, just bite the >>bullet
and go with 4130 chrome-moly steel. 4130 is much >>stronger than
any kind of aluminum you can find, with >>yeild strengths to
90,000 psi and beyond.
>
> Don't forget, guys, there ARE other carbon steel alloy >tubes
besides chromoly. They're isn't as strong as 4130 >but most people
don't need it. It's also less expensive. >An SAE 1026 or 1027
has approximately 65,000 psi yield
>strength (good for 90% of the applications I'm involved >in)
and is about 50% the price of 4130. I hate to see >people spend
money that they don't have to.
>
>Cheers, Steve K7LXC
>Tower Tech
>
List Sponsor: Champion Radio Products - We'll be at the Dayton Hamvention
with all of our safety equipment and other products. Stop by booth #559 and
say hi.
<A HREF="http://www.championradio.com";>www.ChampionRadio.com</A>
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|