Hi Bruce,
We manufacture Boom to Tower plates and Boom to leg mounts just for this
application.
Have these available for 2", 3" and 4" booms, and for Rohn 25,45,55, 65 and
80.
If you need to offset the Boom angle from the tower face we also supply
brackets with turnbuckles.
Had quite a selection at Dayton, but no photo's yet.
If you can wait a few days I will get some photographs for you.
Regards
Richard K0XG www.qth,com/k0xg
----- Original Message -----
From: Bruce Makas <k1my@qwest.net>
To: towertalk submital <towertalk@contesting.com>
Sent: Wednesday, June 06, 2001 11:42 AM
Subject: [TowerTalk] antenna mounts
> Two questions:
>
> 1. I have a rotating tower, how do I mount the antenna to the tower? I
> recall that there are several venders that sell these mounts.
>
> 2. I have a non-rotating tower and I want to mount a beam in a fixed
> direction to this tower. If a face of the tower is not in line with the
> direction I want, how do I mount the antenna? There needs to be some form
of
> adjustment, I would think.
>
> Thanks in advance.
>
> Bruce, K1MY
>
> Sunny Sun Lakes, Arizona
>
>
> List Sponsor: Are you thinking about installing a tower this summer? Call
us
> for information on our fabulous Trylon Titan self-supporting towers - up
to
> 96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
> www.ChampionRadio.com</A>
>
> -----
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
>
List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|