At 06:53 AM 6/7/01 -0500, J. Kincade wrote:
>Still, to follow the "non-conducting materials for the first 1/2 wavelength
>at the lowest freq" (this rule makes perfect sense to me), one would need
>three of these end-to-end on each guy, and at $50 a pop x 2 guys, we're
>talking $900 minimum + fittings. Again makes 6 70' lengths of 6700-lb
>Phillystran look pretty attractive at about $530 + fittings, doesn't it?
Sure does, which is why I now am using all-Philly top guys, and moved the
fiberglass insulators down to my middle guy station. And I got 3
previously-owned 100-foot lengths of 6700 lb. Philly for $75, with potted
ends, which made that look even better.
I would never use more than one of these per guy, and then only if the
nearby antenna was for 20 meters and above. Not 1/2 wavelength, but at
roughly 45 degrees from the antenna elements no interaction was discernible.
73, Pete N4ZR
No, no ... that's WEST Virginia
List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|