Hank
Okay - I have got the context now. Thank you. When you calculate the force
(F = p A) on a cylindrical yagi element or mast where the design pressure p
is given by
p = q Ce Cq I
and Cq is = 0.8 for a cylindrical element > 2" do you use the projected
area or effective area (2/3 projected area)?
.. sylvan
----------------
Sylvan Katz
VE5ZX & G0TZX
Saskatoon, SK
----- Original Message -----
From: "Hank Lonberg" <kr7x@gte.net>
To: "Sylvan Katz" <jskatz@sk.sympatico.ca>
Cc: "EUGENE SMAR" <SPELUNK.SUENO@prodigy.net>; "Tower Talk"
<towertalk@contesting.com>
Sent: Thursday, June 07, 2001 8:13 AM
Subject: Re: [TowerTalk] Wind Loading redux
> Sylvan:
>
> Reread the footnote again and look at the context in which it is
> invoked. It is only for the triangular tower section if they are round
> instead of flat plates. Antennas and rotators fall under the catagory of
> Tower accessories. then if greater than 2" in diameter the coefficient
> is 0.8. If 2" or less then the coefficient is 1.0
>
>
> Hank / KR7X
List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|