In a message dated 6/4/01 4:41:44 PM Pacific Daylight Time, kahager@gis.net
writes:
> Considering the purchase of a used 7 yr old US Tower MA40 Tubular style
> crankup and have been told by the company that the cables need to be
> replaced approx every 3 years depending on the climate by a professional
> installer.
> Has any user of this type of tower had to replace the cables on
> their tower and if so what was the expense? Is 3 years the approx life
span
> for cables on a crankups generally speaking or can you expect to get more
> life out of them. I suppose the company is playing it safe(liability wise)
> when making this recomendation.
I didn't see any responses to this so better late than never.
Yes, the company line is replace the cables every 3 years. This is their
"weasel clause" in case anything happens they can 'weasel' out of any
responsibility.
The real world situation is that yes, cables do need to be replaced
occasionally. How occasionally? You need to replace the cables if 1) there is
deep rust - not just surface rust which is no big deal. 2) Replace the cables
if there's obvious damage. This would be a permanent set that the cable has
taken somewhere. This is where the cable is obviously bent or not in its
normal straight orientation. 3) You should replace the cables if you have
broken strands. Wire rope cable industry standards have a 6/3 rule. That is a
cable should be replaced if there are more than 6 strands broken (crank-ups
normally use 7/19 cables which is 7 bundles of 19 strands each) or 3 breaks
in one strand. Since you have a tower where the cables are basically hidden,
they are not easily observable so you need to figure out how to do it.
To replace (or inspect) the cables on this tower, you have to get it
horizontal and then pull the sections apart. The sections aren't that heavy
so a couple of guys can do it. You just need the room to do it. Also
disassembling an existing antenna array isn't very palatable for many people.
Since you're going to be buying it and then bringing it home, that'll be
a good opportunity to do the aforementioned disassembly/inspection. If the
cables appear to be fine (and they most likely will be unless the tower was
in a hostile environment), then use a good cable lubricant like PreLube 6
(available from <A HREF="http://www.championradio.com";>Champion Radio
Products</A> and recommended by wire rope manufacturers) and then put it up.
To prolong cable life, you can do several things. First, exercise the
tower a couple of times a month. That is, run it all the way up and down a
couple of times. Next, don't use the same spot every time for when the tower
is extended or retracted. It's real easy to just use the limit switch spots
but over time the cable will take a set at those points. It's better to
spread the cable work over different spots than the same one all the time.
And of course do an inspection and use a cable lubricant twice a year.
Cheers, Steve K7LXC
Tower Tech
Factory authorized US Tower installer
List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|