Here is what I found out regarding replacement sheaves for the EZ Way
tower.
First off, Jim at Applied Mechanical Devices was of little help,
He did fax me a sheet of their available sheaves but this was only a
copy out of the Mcmaster-Carr Catalog.
Sava Industries of NJ who specialize in wire rope sheaves do not have
anything close to the size needed....I discovered that the sheaves are
all too thick for the application on an EZ Way Tower. US Tower was not
really even willing to help but did say the pulleys they use are all 5"
I checked with several other sources all with the same result...
So I am stumped on this one.......unless someone out there has BTDT
and lets the rest of us in on where to find these sheaves it looks like
they would have to be custom
made
Anyone else out there with suggestions ???? I know from receiving
off list inquiries for info that there are more than a handfull of hams
who are in need of these
I tried
73
de JB W2GB
List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|