Also, one of these alloys can be welded and the other can't, I believe.
Is it the 6000 series that can be welded?
73,
Brad, W5CGH
===========
--- Hank Lonberg <kr7x@gte.net> wrote:
> Okie Doke Pete:
>
> Lets get to know the alloys and treatment.
>
> 6000: (6061)
>
> A silicon and mangnesium alloy of aluminum. Heat treatable very
> versatile with good formabliliy and corrosion resistance, medium
> strength. Very common alloy. Tensile yield strength 6061-T6: 40,000
> psi.
> E=10,000,000 psi.
>
> 7000: (7075)
>
> A zinc alloy of aluminum. Heat treatable, high strength. Used in
> air-frame structures and highly stressed parts. Tensile yield
> strength
> 7075-T6: 67,000 psi. E=10,000,000 psi.
>
__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/
List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com">
www.ChampionRadio.com</A>
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|