Towertalk
[Top] [All Lists]

[TowerTalk] straightning bent tower section

To: <towertalk@contesting.com>
Subject: [TowerTalk] straightning bent tower section
From: K7LXC@aol.com (K7LXC@aol.com)
Date: Wed, 27 Jun 2001 13:25:23 EDT
In a message dated 6/27/01 7:35:45 AM Pacific Daylight Time, 
asfco@nycap.rr.com writes:

> The top 20 or so foot section of my tower is in need of some
>  straightning. It appears that at some point in its life it was tilted
>  over while it was extended and struck the ground rather hard...
>     Everything looks straight until the top tower section is cranked up
>  about 1/4 of the way.
>     Anyone have any suggestions as to how to remedy this??

    Okay - how about telling us what kind of tower it is. More details are 
necessary before anyone can give you an educated answer.

Cheers,    Steve    K7LXC
Tower Tech

List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A 
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>