MIke,
Since you did not specify narrow or broad band, Ill take the easy route and
say
make a choke balun out of a length of 75 ohm coax that is 1/4 wavelength
long at
the desired frequency. Connect the 100 ohm load to the end with the choke
and a 50 ohm
line to the other end. Dont forget to account for velocity factor of the 75
ohm line.
73, Bob, W5AH
-----Original Message-----
I need a drawing for a 2:1 balun. Please respond direct to me.
73, Mike
KF8OD
List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|