Hello!
I am in the process of building an EME array for 6m, and need to construct the H
frame. I have been unable to find a local source for galvanized clamps, and I
wonder if anyone can suggest a place to purchase them.
My vertical masts are 2.375" OD aluminum pipe. With automotive muffler clamps,
which I have used in the past, I have found that a "heavy duty" 2.25" would
provide
a tight-fitting saddle. If I can't come up with a source for galvanized clamps
at a
reasonable price, the plan is to buy the galvanized U bolts, and use them with
locally powder-coated (including a zinc primer first) heavy duty automotive
muffler
clamp saddles.
Any suggestions would be appreciated. MNI TNX and 73, Lance
--
Lance Collister, W7GJ (ex: WN3GPL, WA3GPL, WA1JXN, WA1JXN/C6A, ZF2OC/ZF8)
P.O. Box 73
Frenchtown, MT 59834 USA
QTH: DN27UB
TEL: (406) 626-5728 FAX:(406) 728-6320
URL: http://www.bigskyspaces.com/w7gj
List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|