How about just plastering over the top of the slab ? Or better still, add
something on top, such as bird-bath, sundial etc. that would convert the
slab of concrete into a 'feature'; something that looks as if it was put
there on purpose. Otherwise, it will always be 'that da** tower-base !'
Tim, EI8IC
----- Original Message -----
From: "Henry Heidtmann" <n4vhk@summitschool.com>
To: <towertalk@contesting.com>
Sent: 22 August 2001 18:27
Subject: [TowerTalk] cut off rohn 25 tips
>
> An SK's wife called me to ask how to fill/cap a section of rohn 25,
> which was hacked off at the slab. Its cut even with the slab, but she's
> concerned about the appearance. Any tips out there?
> Thanks in advance-
> Henry, N4VHK
>
> List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
> Trylon Titan towers, coax, hardline and more. Also check out our self
> supporting towers up to 96 feet for under $1500!!
http://www.anwireless.com
>
> -----
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
>
>
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 96 feet for under $1500!! http://www.anwireless.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|