> I dislike 9913 (I think that is what it was) because the stuff I have is
> hollow and fills with water no matter how you seal it when
> horizontal.
Same here. In Florida, here's a typical 9913 failure: the coax begins to
heat to a very high temperature in the afternoon sun. Then, as is customary
during a summer afternoon, a cool rain develops out of nowhere betwen 3 and
4PM and rapidly cools the cable, thereby causing the air dielectric to
condense and super-saturate with moisture. I have tried several methods of
trying to keep this phenomenon from occurring but I eventually gave up and
threw it away in disgust.
Today, I use the LMR-400 series line. It's light, uses a copper-clad
surface aluminum center conductor (like CATV hard line), it contains a foil
and braided shield, uses a very low-loss, high voltage-rated dielectric and
has a long-life Class-II jacket. I understand that a flooded version of the
cable is now available for direct-bury applications. Pricing is similar to
Belden RG-213, but I've found the LMR line is a dream to work with. Solid
and stranded center conductors are available.
-Paul, W9AC
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!! http://www.anwireless.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|