[Top] [All Lists]

[TowerTalk] Screw anchors - AB Chance?

To: <>
Subject: [TowerTalk] Screw anchors - AB Chance?
From: (
Date: Tue, 6 Nov 2001 01:03:58 EST
To: <>
Date: Mon, 05 Nov 2001 13:14:43 -0800
From: "Donald R. Bozarth" <>
Subject: [TowerTalk] AB chance screw anchors

What is a good source for these AB Chance screw anchors?

Don B.

Don: \
I just happened across my shipping slip from buying mine this summer. Got 
these from "Western States Electric, Inc" in Portland, OR via UPS. They had 
no problem doing "just 3 of them" for me - taped them side by side for UPS 
without crating. Used their part number: J6526WCA - Screw Anchor 6" Helix 66" 
long, paid $15.60 each + 14.08 UPS ground from OR to North ID. These puppies 
were stout, shaft is 3/4" and the "screw" is 1/4" plate. The eye is designed 
for 3 wireline lays and has massive metal. Galv coating was super grade - 
even after beating on the eye with a sledge to get them started and around 
roots there was still galv coating in place!

I have seen prices for smaller sizes of these much higher, like $45/ea! Shop 
around at your electric "transmission" type supply houses. 73's, KD7DCR - Mel

List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!

FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Screw anchors - AB Chance?, <=