Towertalk
[Top] [All Lists]

[TowerTalk] Yaesu Rotor connectors

To: <towertalk@contesting.com>
Subject: [TowerTalk] Yaesu Rotor connectors
From: mpride@us.ibm.com (Mark Pride)
Date: Wed, 7 Nov 2001 11:34:24 -0500
Beware that the different models have different connectors.  The G1000 has
small pins in the metal connector and the G800 has large diameter pins.
Not sure the different connector part numbers that could be pursued on the
open market.

Regards,

Mark, K1RX




Dick Pechie - KB1H <rpechie@snet.net>@contesting.com on 11/07/2001 10:29:09
AM

Sent by:  owner-towertalk@contesting.com


To:   towertalk@contesting.com
cc:
Subject:  [TowerTalk] Yaesu Rotor connectors




Does anyone know of a source for the 7 pin metal connectors on the
G-series of Yaesu rotors? This is the connector on the rotor itself.

Yaesu gets $38.50 for it!

Thanks in advance,

73 Dick  - KB1H



List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!
http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com




List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>