Towertalk
[Top] [All Lists]

[TowerTalk] CATV hardline is sticky

To: <towertalk@contesting.com>
Subject: [TowerTalk] CATV hardline is sticky
From: k4ja@crosslink.net (Paul Hellenberg K4JA)
Date: Wed, 7 Nov 2001 18:26:10 -0000
Hello All

I use lacquer thinner.

73 Paul



I managed to obtain some 3/4" CATV hardline with which I plan to feed a new
horizontal loop. In preparing to install connectors, I discovered that
underneath the outer black jacket, there is some VERY sticky adhesive
between the aluminum shield and the black jacket.  Is there something I can
use to clean off this adhesive?  It makes putting on connectors very messy.

Thanks,
                Kevin.
------------------------------------------------------
Kevin Hemsley
Systems Engineer
Microserv Computer Technologies, Inc.
kev@ida.net
KB7TYA




List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!
http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com



List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>