Towertalk
[Top] [All Lists]

[TowerTalk] Shear Plate Material

To: <towertalk@contesting.com>
Subject: [TowerTalk] Shear Plate Material
From: W4EF@dellroy.com (Mike)
Date: Tue, 4 Dec 2001 15:38:14 -0800
I need to make a vertical shear plate (1/4" x 12" x 12") to 
hold up a tubular shaped current balun/dipole center insulator 
and was wondering whether UV stable black Delrin would
be a good choice. Other possible choices are Nylon 6/6
and Lexan. The material has to be strong enough to hold 
the weight of a 160 dipole (center support). 

Thanks, 

Mike, W4EF...................


List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>