On Mon, 10 Dec 2001 10:19:18 -0600 Charlie Ocker
<charlie.ocker@tellabs.com> writes:
>
> 3 50' 42"
3.2 MHz **
> ** => Not a viable solution, as gamma wire passes
through horizontal
> plane of lower tribander.
Bring the wire in close to the tower (twine will do, as you'll need an
insulating characteristic) to permit the rotation of the lower tribander,
then let it go out again. The tap on my tower is at 89', with a TH6DXX at
97', 40-2CD on RingRotor at 90', TH6DXX at 61', TH7DX at 31'. The middle
TH6DXX, at 61', rotates around the gamma rod which is brought in closer
to the tower and then let out again to proceed further downward. The
bottom TH7DX, at 31', is fixed on EU.
Fred Hopengarten K1VR hopengarten@post.harvard.edu
Six Willarch Road * Lincoln, MA 01773-5105
781/259-0088 *eFax 419/858-2421
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/web/.
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!! http://www.anwireless.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|