In a message dated 1/16/02 5:10:09 AM Pacific Standard Time,
rlake@webryders.net writes:
> I have an HD-73 rotor that is having some problems. I dug out the manual and
> did the troubleshooting with my vom and found the correct readings between
> the pins except when it said that there should be no continuity between
> 1,3,6 and 2,4,5 (I think) well there is cont. between them all....should I
> look at the cable run or the rotor? any help will be appreciated..
The expert on HD-73's is Norm at Norm's Rotor Service. He's the only guy
in the world that sells them, repairs them and has all the parts. Try<A
HREF="www.rotorservice.com"> rotornorm@aol.com</A> and <A
HREF="www.rotorservice.com">www.rotorservice.com</A> .
Cheers,
Steve K7LXC
Tower Tech
________________________________________________________________________
Where do you get ICE bandpass filters & beverage matching boxes? The
same place that pays for the hosting of this list: The eHam Store.
Order online at http://store.eham.net.
-----------------------------------------------------------------------
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|